Isuzu — 4-17 Part time four wheel drive (4WD) system operation

DRIVING sure to operate the 4WD switch to select the 4WD mode beforehand. Switching from the 4WD to the 2WD mode cannot be done by the 4WD switch without putting the 2H, 4H-4L lever in the high speed range. When switching to the 2WD mode, therefore, bring the vehicle to a complete stop and set the gearshift lever to the high speed range in advance. When you drive in the 4WD mode, set the lever to this position to get over steep uphill or muddy roads requiring extra torque. Driving in the 4WD mode on dry paved roads will wear the front tires faster, cause noise, and consume more fuel. Select the 2WD mode for such normal driving.

The transfer gearshift lever cannot be switched from the 4H to the 4L position during driving in the 2WD mode. To do this changeover, be CAUTION - 4–19 - When you drive in the 2WD mode, this range should be used. If you find it no easy to drive in the 2WD on snow- covered, frozen, muddy, or sandy road surfaces, operate the 4WD switch to select the 4WD mode with the gearshift lever remaining in this range.