DRIVING Seeing the conditions of the sandy place or mire ahead, shift the transfer gearshift lever to the 4L range and start the vehicle slowly. Drive at a constant speed then . When you drive on muddy roads, the vehicle may sometimes get into the mire, since it is difficult to check and see the conditions of the road surfaces correctly. To avoid this, drive at the lowest possible speed and get off the vehicle, if required, for a study of the surface conditions.
NOTE (Continued) Driving on sandy or muddy roads NOTE CAUTION When you go down steep downhill roads, shift the transfer gearshift lever to the 4L range, drive at a low speed selecting the most suitable gear and using "engine brake" together with foot brake. Going down steep downhill roads Use "engine brake" taking caution against engine overrunning. - 4–23 - When you go up steep uphill roads, shift the transfer gearshift lever to the 4L range to make good use of engine torque. Going up steep uphill roads