Switch operation location and number SLOW side FAST side Precise adjustment is required. 1 - 2 times 1 - 2 times Some brake drag is felt. - 2 - 3 times Significant brake drag is felt. - 3 - 5 times Vehicle moves backward slightly when stopped on an uphill road. 2 - 3 times - Vehicle moves backward significantly when stopped on an uphill road. - 4–32 - Condition 3. If the brake release timing is slow (brake drag is felt), press the HSA adjust switch toward the "FAST" side. If the brake release timing is fast (vehicle moves backward when stopped on an uphill road), press the HSA adjust switch toward the "SLOW" side. The warning buzzer sounds each time the switch is pressed. 4.
Depress the clutch pedal. Move the gearshift lever to any position except neutral and start the vehicle. Repeat step 3 until the brake release timing matches with your preference. To make the timing slower To make the timing faster DRIVING Condition Switch operation location and number SLOW side FAST side Precise adjustment is required. 1 - 2 times 1 - 2 times Some brake drag is felt. - 2 - 3 times Vehicle moves backward slightly when stopped on an uphill road. 2 - 3 times - Significant brake drag is felt. - 3 - 5 times Vehicle moves backward significantly when stopped on an uphill road. 3 - 5 times -