The engine can be started with another vehicle battery using jumper cables: 1. Use a vehicle which has a battery of the same voltage (12 V or 24 V). 2. Connect the jumper cables in the following sequence. 1 Positive terminal of the dead battery 2 Positive terminal of the booster battery 3 Negative terminal of the booster battery 4 Chassis ground of the dead battery’s vehicle, which is as far as possible from the dead battery Connecting procedures: To start the vehicle when the battery is discharged, use an auxiliary battery of the same nominal voltage i.e. 24 volts (12 volts), as the discharged battery.
damage to your vehicle which explosion, acid burns, electrical Exercise extreme care when handling the battery to avoid serious personal injury and might result from a battery burns, or damaged electric WARNING - 4–46 - components. Never tow the vehicle to start it because the surge forward when the engine starts could cause a collision with the tow vehicle. WARNING Emergency starting DRIVING