SAFETY ASSIST DEVICES This switch is used when you wish to deactivate the ASR equipment. After engine starts when the ASR equipment is in active condition, press the switch. This will deactivate the ASR equipment and the indicator light on the instrument panel comes on. Press once more to activate the ASR again. Note that the ASR equipment will not work once you deactivate the ASR equipment. Be careful when driving on a slippery road. NOTE (Continued) NOTE ASR OFF switch If the vehicle wears tire chains, it may be easier to start the vehicle with the ASR inactive condition such as on an icy graded road. Note that the vehicle stability deteriorates with the ASR off.
The following conditions may develop but these are not defects. During the car inspection using speed tester and brake tester, the ASR may operate and disrupt the inspection. Press the ASR OFF switch to deactivate the ASR equipment. You may notice minimal vibrations or operating sound when starting and accelerating the vehicle on a slippery road. This sound is generated when ASR operation is being checked. Engine speed may be lowered in sudden, but it is because the ASR equipment is operating. NOTE - 5–3 - ASR (ANTI-SLIP REGULATOR) This equipment is used to prevent the drive wheels from spinning to secure vehicle stability, when running on a slippery surface such snowy road.
The ASR equipment is automatically in active condition once the engine starts. You can also turn the ASR equipment off using ASR OFF switch. The ASR indicator blinks while the ASR operates. At this time, the road is very slippery. Avoid abrupt vehicle operation and drive the vehicle with extreme caution by slow down before entering such as the curve. Even on an ASR-equipped vehicle, wear tire chains and winter tires and carefully drive on the snowy and icy roads. The ASR is not designed to improve start performance significantly. When you make a hill-start on an icy road etc., operate the accelerator pedal carefully. CAUTION V