The temperature gauge shows the engine coolant temperature when the ignition key switch is turned "ON". The letters "C" and "H" on the dial represent "cold" and "hot". Normal coolant temperature indication is when the gauge needle is within the yellow line ( 4HK1-TC white line). Temperature gauge Red zone The calibration and the red zone of tachometer are various depending on the models fitted. Never operate the vehicle with the tachometer needle in the red zone. Continued operation with the tachometer needle in the red zone can lead to serious engine damage. The engine tachometer indicates the engine speed in rpm, the red zone represents over-running the engine.
Engine tachometer V NOTE CAUTION - 2–8 - CONTROLS AND INSTRUMENTS When the key switch is turned to the "ACC" or "ON" position, the time will appear digitally on the clock face. To set the time, operate the knob for the following functions: To set hours: Depress and turn the knob counter- clockwise to advance the hour. To set minutes: Depress and turn the knob clockwise to advance the minutes. The hour indication will remain unchanged when the minute changes from "59" to "00". To reset minutes: Pull the knob out to reset the minutes to "00". Digital clock