1. Fully apply the parking brake, put the transmission shift lever in the neutral position, and start the engine. CABLE CONTROL TYPE (EXCEPT Smoother VEHICLE) Connecting the P.T.O. OPERATION OF THE P.T.O. OPT This section explains the method of operating the P.T.O. lever and the P.T.O. switch. For details about the operation of controls other than the lever and switch, refer to the separate instruction manual provided by its maker. When operating the P.T.O. lever or switch, ensure that the area is Before operating the P.T.O. lever or switch, bring the vehicle to a complete stop, apply the parking pedal depressed to the floor with Never operate the P.T.O.
lever or switch while the vehicle is in clear of people or obstacles around or above the vehicle before operating the lever or Always park the vehicle on flat ground for P.T.O. operation. brake fully and keep the brake WARNING - 6–6 - the right foot. switch. motion. HANDLING OF SPECIAL EQUIPMENT 3. The bed may be dumped with the gate opened if the gate is kept level with the bed using a restriction chain, etc. Ensure, however, that sufficient space is left between the rear gate and the ground when the bed is WARNING (Continued) raised for dumping.