SERVICE AND MAINTENANCE Check that the fan belt gives a deflection of approximately 8 to 12 mm (0.32 to 0.47 in) when the intermediate part of the belt is depressed with your finger (when pushed with a force of 10 kg (22 lbs) ). Also check the belt for cracks and damage. Insufficient tension will result in battery discharge or engine overheating, whereas excessive tension could cause damage to the alternator or V belt. CAUTION (Continued) CAUTION Fan belt If the engine in running, stop the engine and allow 5 minutes for the oil to settle down before checking the oil level. MAX MIN - 7–11 - NOTE Pull out the oil level gauge rod (oil dipstick), wipe clean it and reinsert.
Again pull it out and check that oil level is within MAX and MIN level marks. Also check the oil on the gauge rod for contamination. Engine oil level should be checked with the vehicle parked on level ground (before the operation of engine). MAINTENANCE GUIDE REGULAR INSPECTION NOTE Engine oil level