SERVICE AND MAINTENANCE 1. To change engine coolant, make sure that the engine is cool. When the coolant is heated to a high temperature, be sure not to loosen Otherwise you might get scalded by hot vapor or boiling water. To open the radiator cap, put a piece of thick cloth on the cap and loosen the cap slowly to reduce the pressure when 2. Open radiator cap and drain the cooling system by loosening the drain valve on the radiator and on the cylinder body. the coolant has become cooler. or remove the radiator cap. WARNING Engine coolant FRONT Remove the joint bolt on the intake side of the feed pump, then screw out the strainer counterclockwise and clean it.
Then, push the priming pump on the injection pump to bleed the fuel system. - 7–29 - Feed pump strainer ( Except 4J 4HF1-2 ) 4H 13mm (1/2 inch) Ring wrench 4H 4H