Isuzu — 7-18 Periodic maintenance

Remove the screws retaining the lens and remove the lens. Side turn signal lights V Remove the screws retaining the lens and remove the lamp unit. - 7–48 - Fog lights V SERVICE AND MAINTENANCE 3. Fit the iron pin in the upper side portion by aligning it with the center of corresponding grommet. 4. Pull the front combination light assembly lightly toward the front of vehicle to make sure that the pin and grommet are fitted securely. 5. Tighten the lower side screw of front combination light assembly. Then, hook the seal rubber on two projections under the headlight. Push it in securely until a click is heard. NOTE