Isuzu — 7-65 Lubrication guide

Drain the transmission case by removing the drain plug (D) on the lower face of the transmission case. Fill the transmission case to the filler plug (F) with the specified engine oil through the filler plug hole. Right after driving, the oil may be hot, so be careful. Changing transmission oil WARNING Use CE or CD grade engine oil for diesel engine. (Refer to "RECOMMENDED LUBRICANTS AND DIESEL FUELS".) When the engine crankcase is filled to the high level mark on the oil dipstick, start and let the engine idle for a few minutes. Stop the engine and recheck the oil level and replenish, if necessary.

NOTE - 7–66 - SERVICE AND MAINTENANCE Then fill the engine crankcase from the filler port with new engine oil of the specified grade.