The control switch operates in three steps to operate the following lights: 1st step: Clearance lights, tail lights, license plate lights and instrument cluster lights. 2nd step: Headlights in addition to the above lights. 3rd step: Rear fog lights in addition to the above lights. Light control switch The combination switch lever consists of the light control switch, turn signal switch, dimmer switch and passing light switch. On the LHD model, this switch is on the left side of the steering column. Combination switch lever - 2–22 - CONTROLS AND INSTRUMENTS "ACC": You can use some electrical accessories when the engine is not running. "ON":
The "ON" position is for pre- heating and normal running. "START": Turning the key to this position will start the engine. The key returns to the "ON" position when released. ѓ If you need to turn off the engine with the vehicle in motion, turn the key only to "ACC". DO NOT turn the key to "LOCK". This will result in locking the steering ѓ Turning the engine off with the vehicle in motion is dangerous, Do not keep the starter engaged for more than 10 seconds. wheel and loss of steering as braking efficiency will be WARNING CAUTION control. reduced.