After stopping the engine with the ASR inactive condition, the ASR equipment will automatically be active when you start the engine again. This switch is used when you wish to deactivate the ASR equipment. After engine starts when the ASR equipment is in active condition, press the switch. This will deactivate the ASR equipment and the indicator light on the instrument panel comes on. Press once more to activate the ASR again. Note that the ASR equipment will not work once you deactivate the ASR equipment. Be careful when driving on a slippery road. NOTE - 2–26 - ASR OFF switch V CONTROLS AND INSTRUMENTS Switching between 2WD and 4WD is done by pushing the 4WD switch on the instrument panel.
Be sure to bring the vehicle to a complete stop before operating the 4WD switch. When you drive in the 4WD mode, make sure that the free wheel hubs are in the "LOCK" position. Four wheel drive (4WD) switch 4WD NOTE