BEFORE DRIVING YOUR VEHICLE The driver's seat may be adjusted forward or backward by pulling up the lever at the front of the seat and then using your body to move the seat to the desired position. Let go of the lever at the desired position. Driver's seat Always install a new seal to the switch when replacing the battery. Use of an old seal or no seal at all will result in switch damage. Be absolutely sure that the positive side of the battery is facing up (reversing the battery position will result in battery fluid leakage). The battery and the seal is available from your Isuzu dealer. The items are sold as a set. Their use is strongly recommended. CAUTION - 3–5 - 1.
Use a small screwdriver to loosen and remove the screw and the cover. 2. Peel the seal from the switch. 3. Remove the battery. 4. Install the new battery (CR1216-3V). The positive side (marked with a "+") must be facing up. 5. Apply a new seal to the switch (this holds the battery in place). 6. Install the cover and tighten the screw. Battery replacement