4. To unfasten the belt, push in the button on the buckle. 3. Position the lap belt across the lap as low on the hips as possible. Then, adjust to a snug fit by holding the free end of the strap and pulling it through the latch plate until the lap belt is snug across the lap. This reduces the risk of sliding under the belt during an accident. - 3–8 - BEFORE DRIVING YOUR VEHICLE 1. Sit up straight and well back in the seat. 2. Take hold of the latch plate at an angle to the strap and slide it toward the front of the vehicle. Then pull it slowly across your lap and push the latch plate into the buckle until it clicks. Seat belt (2-points)