Isuzu — 3-1 Operation of controls

Periodically inspect belts, buckles, latch plates, retractors and anchors for damage that could lessen the effectiveness of the restraint system. Replace belts if cut, weakened, frayed or subjected to collision loads. Check that anchor mounting bolts are tight to the floor. its function. Keep sharp edges and damaging objects away from belts. Have questionable parts replaced. Clean only with mild soap solution and lukewarm water. Seat belt inspection and care: Keep seat belts clean and dry. 3 . To unfasten the belt, push the button on the buckle. The belt should retract when the buckle is unlatched but hold the latch plate as it does so, to keep it from hitting people or nearby objects.

To help prevent damage to the safety belt and interior trim, before closing the door be sure the belt is fully retracted and the latch plate is out of the way. Keep as low on hips as possible - 3–10 - BEFORE DRIVING YOUR VEHICLE 2. To reduce the risk of sliding under the belt during a collision, position the belt across your lap as low on your hips as possible and adjust it to a snug fit by pulling the "shoulder" portion upward through the latch plate. The lap-shoulder belt is designed to lock during a sudden stop or impact. At other times it should move freely.

To help reduce the risk of personal injury in an accident, if a shoulder belt is on or very close to a child's face or neck, move the child toward the center, away from the shoulder belt. Latch plate Slide button Buckle CAUTION Keep as low on hips as possible Keep as low on hips as Keep as low on hips as possible