Optimized Idle User Manual to change the maximum Heat Mode temperature limit. Any temperature below this limit can be used by the driver to set the thermostat for Heat Mode. The range for this setting is 21 -- 29°C (70 -- 85°F). 3. Use or 4. Press Display. Press to save your changes for Continuous Run and return to the Main to continue. Modifying the Password 1. At the Main Display, press icon is displayed and enter the correct password. Entering the wrong password will either flash a password code back to the user or return the user to the Main Display. Refer to section "Password Entry". until the 2. Press until and are displayed with the first digit flashing. 3. Use button.
or to change the first digit of the password then press the 4. Use or to change the second digit of the password then press the button. 5. Use button. or to change the third digit of the password then press the 6. Use or to change the fourth digit of the password then press the button. 7. The icons are displayed with the first digit flashing. You will need to re--enter the new password again for verification, using steps 3 - 6. If the wrong “new” password is entered incorrectly, the old password is kept and the display returns to the Main Display. and 8. Once the new password is entered correctly, the thermostat will flash the first two digits and then flash the second two digits.
At this point the new password has been saved. 9. Write down the password for future reference. All information subject to change without notice. 23 DDC-SVC-MAN-0019 Copyright © 2016 DETROIT DIESEL CORPORATION