Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK BEFORE STARTING CHECK COOLANT LEVEL, ADD COOLANT WARNING up to the FULL mark. 3 - 71 Always perform the procedures in this sec tion before startin g the engine eac Do not open th e radiator cap unless necessar y. When checking th e coolant, always wait for the engine to co ol down and check the sub tank. Immediately a fter the engine is stopped, the coolant is at a high t emperature and th e radiator is under high internal pressure. If the cap is re moved to check the coolant le vel in this condition , there is a hazard of burns. Wait for the temperature to go down, then tu rn the cap slowly to release the pressure and remo ve it c arefully. 1.

Check that the cooling water in sub tank (1) is between the FULL and LOW marks. 2. If the level i s LOW, remove cap (2) and add the engine coolant 3. If there is n o coolant in the subtank, a dd water to the ra diator through wa ter filler (3) a t the top of the r adiator, then add water to the subt ank. there is no oil in the engine coolant or any other g coolant, tighten the cap securely. olant is added than normal, then check for water 4. Check that problem. 5. After addin g coolant, tighten the cap s 6. If more co leakage.