. OPERATION OPERATION ADJUSTMENT BEFORE OPERATION ADJUSTING OPERATOR'S SEAT WARNING down on the rear of the seat to tilt it backward. 3 - 81 P ark the machine in a safe pl ace and stop the engine when ca rrying out adjustment of t he operator's sea A djust the seat before startin g operations or when changing o perators. A djust the position of the ope rator's seat so that you can depre ss the brak e pedal f ully with your back again st the seat backrest. (A) Fore-and-aft adjustment Pull lever (1) up, set the sea t to the desired position, then the l ever. Amount of adjustment:
180 (10 m (B) Adjusting seat angle Mov Mov e lever (2) down and pu sh down on the front of t he se at to it for ward. Adjustment range: 13 degre es (Tilt forward/tilt back angle (C) Setting seat for operator' Turn grip (3) to adjust the str ength of the suspension Adjustment range: (Target) 5 0 to 120 kg (110 to 265 (D) Adjusting backrest angle the backrest to the front or rear. back pressed against the seat back. Mov e lever (4) up and move the backrest to the front or re Whe n doing this, keep your back pressed against th e sea t back. If yo ur back is not against th e seat back, the seat back m ay spring back s uddenl Adjustment range:
66° to the front (3° x 22 stages) r (3° x 24 stages) 72° to rea (E) Seat height adjustment Mov e lever (2) up/down, the n move the seat up or down a s desired . Since lever ( 2) is also used for adjusting seat angl e, set the seat to the de sired height while adjusting th Adjustment range: 60 mm (2