Komatsu — CHECKS AFTER STOPPING ENGINE

. OPERATION OPERATION STOPPING ENGINE NOTICE If the engine is suddenly stopped without allowing it to cool down, there is danger that the life of the engine parts will be shortened, so never stop the engine suddenly except in emergency. Allow the engine to cool down gradually before stopping it. 1. Set the gear shift lever to the N position, then set the parking dump lever to the HOLD position. 3. Run the engine at low idle for about 5 minutes to cool down gradually. the engine. 3 - 91 switch to th e PARKING posit 2. Lower 4. Turn t he key of st arting switch (1) t o the OFF position to stop 5. Remo ve the key f rom st arting switc CHECKS AFTER STOPPING EN GINE 1. Walk a of oil a 2.

Fill the 3. Check 4. Remo 1. Walk a round the machin e and chec k the dump body, body work, and undercarriage, an d check also for leakage nd water. fuel tank. compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. affixed to the undercarriage. 2. Fill the 3. Check the engine compartment for paper and debris. Clean out any paper and debris 4. Remo ve any mud affixe d to the und ercarriage