Komatsu — MOVING MACHINE OFF (FORWARD, REVERSE), STOPPING

. OPERATION OPERATION MOVING MACHINE IN REVERSE WARNING When switching between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so use extreme caution when reversing the machine. Always stop the machine completely before shifting between FORWARD and REVERSE. 3 - 94 Place gear s hift lever (1) in the R position, the n gradual ly depress accelerator p edal (2) to move the machine off REMARK hine cannot travel in reverse when the dump body is The mac is raised. Lo wer the dump bo dy, set the dump lever to t he FLOAT position, t hen set the gear shift lever to the R positio n.

If the gea r shift lever is set to the R position when th e machine is travelin g forward at a spe ed of 4 km/h (2. 5MPH) or more , the transmiss ion is placed in he travel is reduced, is also throt NOTICE When shift ing between FORWARD and REVERSE, stop the machine completely , and run the engine at low idle when s hifting the lever. After moving the gear shift lever, d o not depress the accelerat you detect that the transmission cl utch has engaged Do not oper ate the gear shift lev er with the accele rator pedal depressed. This will ca use a big shock, an d will also reduce the servic e life o f the machine.