. MAINTENANCE SERVICE PROCEDURE CLEAN, CHECK RADIATOR FINS AND AFTER COOLER FINS WARNING If compressed air scattered around dust and debris, there is danger of injury. Always equipment such as (4), the fins can be 4 - 37 wear protective protective glasses and mas If r adiator fins (1) or after cooler fins (2) become clogged or b ent, it wil l cause overheating o f the engine, so alway s clean or car ry out inspection , and ask your Komatsu distributor to take the necessary action.
Cleanin g can be carrie d out by using jets of a ir, steam, or water, but be careful not to le t the nozzle contact th When u sing compress ed air or steam, keep t he nozzle at a right angle to the radiator a nd after cooler. Examin e the rubber h ose, and if any cracks or brittle place s are found, r eplace the ho se. In addition, check also for loose hose clamps NOTICE If s tea damaged, s o keep a good d istance in between when Us e the Jet p following values as ressure: Lower than a benchmark. 9.8 MPa (100 kg/cm2) an 2 mm (0.08 in) Nozzle diameter: Less th Distance between nozzle and fin (A): More than 1