. MAINTENANCE SERVICE PROCEDURE CHECK OF INFLATION PRESSURE OF TIRES AND INFLATION OF THEM WARNING HD325 Tire size Inflation pressure 18.00-33-32PR (standard) 0.56MPa {5.75kg/cm 2 , 81.7 PSI} 18.00R33 aa (if equipped) 0.69MPa {7.00kg/cm 2 , 99.4 PSI} HD405 NOTICE If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged. Always keep the tire inflation pressure within +0 to +0.03 MPa {0.3 kg/cm 2 , 4.3 PSI} of the value in the table above. 4 - 40 When inflati ng a tire, check th at any p erson will n ot enter the working area and use an air chuck whi ch has a clip and whi ch can be fix ed to the air valve.
While inflati ng the tire, check t he inflat ion pressure occasional ly so that it will not ris e too high. If the rim is n ot fitted normally , it may b e broken an d scattered while the tire is inflate d. Accordingly, p lace a g uard aroun d the tire an d do not work in fron t of the rim but w ork on th e tread side of the tire. f the rim Abnormal d rop of inflation p ressure and abnorm al fitting o rim indicate a tr ouble in the tire this case, be sure to ask a tire repair shop Be sure to o bserve the specifi ed inflat ion pressur Do not adju st the inflation pr travel or hea vy-load work.
Check Measure the i nflation pressur e with a tire press ure gauge , while the tires are cool, before s Inflation of tires ation pressure properly. Adjust the infl ation pressure properly When inflatin g a tire, use an air chuc k which ca n be fixed to the air valve of the tire as sho wn in the figure. Do not work in front of the rim but w ork on t he tread si de of the ti The proper in flation pressure is show n below. Tire size Inflation pressure 18.00R33aa 0.69MPa {7.00kg/cm2, 99.4 PSI}