. MAINTENANCE SERVICE PROCEDURE EVERY 1000 HOURS SERVICE Carry out maintenance for EVERY 250 HOURS and EVERY 500 HOURS SERVICE at the same time. REPLACE FUEL MAIN FILTER CARTRIDGE WARNING Prepare a filter wrench After replacing the fuel pre-filter cartridge, replace the fuel main filter cartridge. 1. Close supply valve (1) of the fuel tank. 2. Set the container to catch the fuel under the filter cartridge. 3. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it. 4. Clean the filter holder, coat the packing surface of the new filter cartridge thinly with oil, then install the filter cartridge to the filter holder.
NOTICE Do not add fuel to fuel main filter cartridge (2). 4 - 61 After the engine has been operate d, all parts are at high temperature, so do not replace the filter im mediately. Wait for all parts to cool down before starting the o peration. the engine fuel piping system when the engine is running. High pressure is generated inside When replacing the filter, wait for at least 30 seconds after stopping the engine to let the intern al pressure go down before replacing the filter. se. Do not bring any fire or flame clo NOTICE Genuine Komatsu fuel filter cartri dges use a special filter that has highly efficient filtering abili ty.
When replacing the filter cartridge, always use a genuine K omatsu part. The common rail fuel injection sy stem used on this machine consists of more precise parts tha n the conventional injection pump and nozzle. If any part other than a genuine K omatsu filter cartridge is used, dust or dirt may get in and caus e problems with the injection system. Always avoid using subs titute parts. When carrying out inspection or maintenance of the fuel system, pay more attention than norma l to the entry of dirt. If dirt is stuck to any part, use fuel to was h it off completely.