Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE BRAKE OIL FILTER ELEMENT WARNING cause burns. Wait for the REMARK a container to catch the drain oil under the brake oil filter. 4 - 68 The parts and oil are at high temperature imm ediately after the engine is stopped, and ma . release the internal pressure, then remove it. temperature to go down before starting the work When removing the oil filler cap, turn it slowly to release t he interna l pressure, then Prepare a filter wrenc 1.

Depress the brake pedal at least 20 times to reduc e the pr essure inside the brake c ontrol accumulator to When the pressure in th e accumulator is released, the operatin g effort of the brake peda l becomes lighter an d the oil pressure noise disap 2. Remove the bolt, th en remove accumulato r cover (1), and p 3. Remove filter case 4. Take out the eleme nt and wash the inside of the fil ter case. Replace O-ring (3) and backup ring (4) on the filte new parts, coat thin ly with clean oil, then i 5. Assemble a new el ement in the filter case the element thinly w ith clean oil, then insta Tightening torque: 7 {8 to 10 kgm, 57.9 t 6. Install accumulator