UEN00665-00 50 Disassembly and assembly Cab related 9. Remove rear cover (10) to (13). Removal and installation of operator's cab assembly Removal k Disconnect the negative terminal (–) of the battery before starting the work. 1. Remove front window (1). 2. Remove step plate (2). 3. Remove floor mat (3). 4. Refer to “Removal and installation of monitor assembly“, and remove monitor assembly (4). 10. Remove duct (14). 11. Remove cover (15). a Disconnect connector H15 fixed on the back from the clip. 5. Remove cover (5) and (6). 6. Remove cover duct assembly (7). 12. Remove plate (16). 7. Insert key (8), turn it right, and open the out- side-air filter cover. 8. Remove outside air-filter(9).
13. Remove plate (17). 14. Remove lock pin (18) and remove duct (19). 2 PC210, 230, 240-8