UEN00665-00 50 Disassembly and assembly a By using the white gasoline, wipe off the adhesive before it is dried up. a When cleaning the glass, do not give an impact on it. 8. Fix the window glass. 1) After installing right window glass (1) to the operator's cab, insert stopper rubbers X3 to 2 places (v) at the bottom of the glass to fix the glass. 10. Protect the stuck window glass. 1) Keep the stopper rubbers, styrene foam blocks, and rubber bands installed for 10 hours.
(at temperature of 20°C and humidity of 60%) 2) After removing the stopper rubbers, sty- rene foam blokes, and rubber bands, wait at least 14 hours, that is, at least 24 hours in total, before operating the machine actually. 2) By using styrene foam blocks [9] and rub- ber bands [10], fix the window glass and the dam rubber to fit them completely. 9. After installing the window glass, remove any excess of the primer and adhesive from the operator's cab and window glass. 14 PC210, 230, 240-8