Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of air conditioner unit assembly

UEN00666-00 50 Disassembly and assembly 23. Remove cover (32). Installation q Installation is done in the reverse order of removal. [*1] a When installing the air conditioner circuit hoses, use care so that dirt, water, may not enter. a Make sure before the installation that there is O ring at the piping connector of the air condi- tioner hose. a Check that there is no defect or deterioration on the O ring. a When connecting the refrigerant piping, coat the O ring with compressor oil for new refriger- ant (R134a) (Denso: ND-OIL8, Zexcel: ZXL100PG (PAG 46 or equivalent)) . 24. Remove mounting bolt (33) and disconnect air conditioner tube (34). [*1] 25. Disconnect heater hose (35).

a Check the connecting point. 3 Mounting bolt: 8 – 12 Nm {0.8 – 1.2 kgm} q Filling of air conditioning gas By using tool X1 , fill the air conditioner gas (R134a) inside the air conditioner circuit. a Filling quantity: 850 ± 50 g 26. Remove the 7 mounting bolts and air condi- tioner unit assembly (36). 4 PC210, 230, 240-8