UEN00666-00 50 Disassembly and assembly Removal and installation of monitor assembly Removal k Disconnect the negative terminal (–) of the battery before starting the work. 1. Remove cap (1). 2. Remove cover (2) and then disconnect wiring connector P31 (3) for air conditioner sunlight sensor (S). 3. Remove duct (4). 4. Remove cover (5) as follows. [*1] 1) Insert flat-head screwdriver inside slit (SL) and push it upward. 2) Release lock (L) and remove the cover. 3) Disconnect wiring connector M04 of the cigarette lighter from the back of cover (5). 5. Remove the 4 mounting bolts and lift monitor assembly (6). [*2] 6. Disconnect connectors CM01 (7), CM02 (8) and CM03 (9).
a Since CM02 (8) and CM03 (9) can be installed reversely, be careful not to mis- take. CM 03 (9) is a green connector. 7. Disconnect connector (10). 6 PC210, 230, 240-8