50 Disassembly and assembly UEN00666-00 Removal and installation of engine controller assembly Removal k Disconnect the negative terminal (–) of the battery before starting with the work. 1. Turn the upper structure by 90 degrees. 2. Remove cover (1). Installation q Carry out installation in the reverse order to re- moval a Reference q How to replace the seal of O ring of power source connector (4). Seal of O ring: 1010-074-0406 (NIHON-DEUTSCH Ltd.) 3. Open the engine hood. 1) Remove cover (6) by nipping the tab with twee- zers [1]. 4. Disconnect connectors CE02 (2) and (3) from the engine controller. a The connector is locked with the inside hex head bolt L6 (4 mm). 5.
Disconnect connector (4) from the engine con- troller by pushing the lock. 6. Remove the mounting bolt and engine control- ler (5). a Ground (E) and harness clamp are tight- ened together with. 2) Remove O ring (7) with tweezers [1]. PC210, 230, 240-8 9