10 Structure, function and maintenance standard UEN00100-00 Arm regeneration circuit 1 1. If the cylinder head pressure is higher than the bottom pressure 1. Hydraulic pump 2. Arm spool 3. Pressure compensation valve 4. Safety-suction valve 5. Suction valve 6. Check valve 7. LS shuttle valve Function q During arm digging, regeneration circuit pro- vided from the cylinder head to the bottom increases the cylinder speed as the cylinder flow involves the pump delivery plus regener- ated flow. Operation q If the cylinder head pressure is lower than the bottom pressure, pressurized oil (A) from the cylinder bottom flows to drain circuit (B) from the notch of arm spool (2).
q On the other hand, remaining oil flows to regeneration circuit (C), opens check valve (6) and flows to the cylinder head via circuit (D). q Flow from regeneration circuit (C) and pump (1) merges in circuit (E). PC210, 230, 240-8 33