UEN00100-00 10 Structure, function and maintenance standard Function q Prevents the pressurized oil from reversing from the work equipment cylinder and the latter from a sudden drop if the piping bursts between the control valve and the work equip- ment cylinder. Operation 1. When the work equipment lever is in neutral q Check valve (5) is closed under the holding pressure of the cylinder led from port (CY) to chamber (b). When the piping is free of burst If the piping is bursted q If piping (A) bursts between the control valve and the work equipment cylinder, chambers (a) and (b) are shut off same as when the piping has no burst.
q Pilot pressure led to port (PI) from the PPC valve when in neutral is 0 kg/cm 2 . q Spool (1) is pressed to the left by the force of springs (2) and (3) q Pressure for the work equipment cylinder is held to prevent a sudden drop of the work equipment. q Chambers (a) and (b) are shut off. q No pressurized oil flows between the control valve and the work equipment cylinder. q Accordingly, the work equipment is held in position. q If the work equipment cylinder has abnormally high pressure, safety valve (4) is actuated by the holding pressure of the work equipment cylinder. q Chambers (b) of L.H. and R.H. hydraulic drift prevention valve for the boom are intercon- nected by port (PCY).
q Chambers (b) will have the same pressure if the L.H. and R.H. hydraulic drift prevention valves have a difference in leakage. 48 PC210, 230, 240-8