Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Travel motor

UEN00160-00 10 Structure, function and maintenance standard Brake valve q The brake valve consists of suction safety valve (18A) and counterbalance valve (18). Operation when pressurized oil is supplied q Operating the travel lever conducts the pres- surized oil from the control valve to port (PA). q Functions and operations of respective compo- nents shall conform to the following. q The pressurized oil push-opens suction safety valve (18A) and then flows to motor outlet port (MB) via motor inlet port (MA). 1) Counterbalance valve and check valve q The motor outlet side is closed by suction safety valve (18B) and spool (19), so the pres- sure at the supply side rises.

Function q When traveling downhill, the machine travel speed tends to get faster than the motor (engine) speed because of the downward force generated from its own weight. q If the machine travels with the engine at low speed, the motor may rotate without load, resulting in run away and inviting a very dan- gerous situation. q These valves are used to prevent above by controlling the machine to travel according to the engine speed (pump delivery). q The pressurized oil on the supply side flows to chamber (S1) via orifice (E1) and orifice (E2) of the spool (19). q As the pressure in chamber (S1) goes above the spool selector pressure, spool (19) is pushed toward right. 22 PC210, 230, 240-8