Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Solenoid valve

10 Structure, function and maintenance standard UEN00160-00 1. PPC lock solenoid valve 2. 2-stage relief solenoid valve 3. Swing brake solenoid valve 4. Travel speed solenoid valve 5. Travel junction solenoid valve 6. ATT selector solenoid valve 7. Connector 8. Moving core 9. Coil 10. Spool 11. Block 12. Spring When solenoid is turned on q As the signal current flows from the controller to solenoid (9), solenoid (9) is energized. Accordingly, spool (10) is pushed to the right. This operation flows the pressurized oil from the main pump, through port (P), via inside spool (10), to port (A), and eventually to the actuator. At the same time, port (T) closes, the oil does not flow to the tank.

T: To tank A1: To PPC valve A2: To main valve (2-stage relief valve) A3: To swing motor A4: To L.H. and R.H. travel motors A5: To main valve (Travel junction valve) A6: To ATT selector valve P1: From main pump ACC: To accumulator Operation When solenoid is turned off q Since the signal current does not flow from the controller, solenoid (9) is deenergized. For this reason, spool (10) is pushed to the left by spring (11). Since port (P) is closed to port (A), pressurized oil from the main pump does not flow to the actuator. At this time, the oil from the actuator is drained through ports (A) and (T) into the tank. PC210, 230, 240-8 51