UEN00227-00 20 Standard value table Standard service value table 1 Standard value table for engine related parts 1 PC210, 210LC, 210NLC, 230NHD-8 2 PC210, 230, 240-8 Applicable model PC210, 210LC, 210NLC, 230NHD-8 Engine SAA6D107E-1 Cate- gory Item Measurement condition Unit Standard value for new machine Judgement criteria Engine Engine speed • Coolant temperature: operating range High idle rpm 2,060 ± 70 2,060 ± 70 Low idle rpm 1,050 ± 50 1,050 ± 50 Rated speed rpm 2,000 2,000 Intake pressure (boost pressure) • Coolant temperature: operating range • Arm IN relief + Power Max. kPa {mmHg} Min. 133 {Min. 1,000} 103 {775} Exhaust gas color • Coolant temperature:
operating range At sudden acceleration % Max. 25 35 At high idle % Valve clearance • Normal temperature Intake valve mm 0.25 0.152 – 0.381 Exhaust valve mm 0.51 0.381 – 0.762 Compression pressure • Oil temperature: 40 – 60°C Compression pressure MPa {kg/cm2} Min. 2.41 {Min. 24.6} 1.69 {17.2} Engine speed rpm 250 – 280 250 – 280 Blow-by pressure • Coolant temperature: operating range • Arm IN relief + power max. kPa {mmH2O} Max. 0.98 {Max. 100} 1.96 {200} Oil pressure • SAE0W30E0S, SAE5W40E0S, SAE10W30DH, SAE15W40DH, SAE30DH engine oil • Coolant temperature: operating range High idle kPa {kg/cm2} Min. 0.29 {Min. 3.0} 0.25 {2.5} Low idle kPa {kg/cm2} Min. 0.10 {Min.
1.0} 0.07 {0.7} Oil temperature • Whole speed range (inside oil pan) °C 80 – 110 120 Fan belt tension • Between fan pulley and alternator pulley • Deflection when pressed with finger force of approx. 98 N{10 kg} mm 8 6 – 10 Air conditioner compressor belt tension • Between fan pulley and compressor pulley • Deflection when pressed with finger force of approx. 98 N{10 kg} mm 5 – 8 5 – 8