Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

UEN00229-00 30 Testing and adjusting t Ordinary functions and special functions of machine monitor The machine monitor has the ordinary function and special functions and displays information of various types on the multi-display. Some items are displayed automatically according to the internal setting of the machine monitor and the oth- ers are displayed according to the operation of the switches. 1. Ordinary functions: Operator mode The items in this mode are displayed ordinarily. The operator can display and set them by operating the switches (Display and setting of some items need special operations of the switches). 2. Special functions:

Service mode The items in this mode are not displayed ordinarily. Each serviceman can display them by operating the switches specially. This mode is used for special setting, testing, adjusting, or troubleshooting.

O (Special operation) O (Special operation) 4 PC210, 230, 240-8 t Operator mode (Outline) Page 6p A Display of KOMATSU logo 6p A Display of inputting password 7p A Display of check of breaker mode 7p A Display of check before starting 7p A Display of warning after check before starting 8p A Display of ending of maintenance interval 8p A Display of check of working mode and travel speed 8p A Display of ordinary screen 8p A Display of end screen 9p B Selection of auto-deceleration 9p B Selection of working mode 9p B Selection of travel speed 10p B Operation to stop alarm buzzer 10p B Operation of windshield wiper 11p B Operation of window washer 11p B Operation of air conditioner/heater 11p B Operation to display camera mode (if camera is installed) 12p B Operation to display clock and service meter 12p B Check of maintenance information 13p B Setting and display of user mode (Including KOMTRAX messages for user) 13p C Display of energy-saving guidance 14p C Display of caution monitor 14p C Display of automatic judgment of breaker 15p C Display of user code and failure code 15p Service mode Page 20p Monitoring 21p Abnormality record Mechanical systems 26p Electrical systems 27p Air-conditioning system/Heater system 33p Maintenance record 34p Maintenance mode change 35p Phone number entry 37p Default Working mode with key ON 38p Setting of unit 39p With/Without attachment 40p Setting of attachment/maintenance password 41p Setting of camera 42p Setting of ECO display 43p Setting of automatic judgment of breaker 44p Adjustment Pump absorption torque (F) 45p Pump absorption torque (R) 46p Setting of travel Lo speed 47p Adjustment of flow to attachment in compound operation 48p Reduced cylinder mode operation 49p No-injection cranking 50p Display of fuel consumption 52p Display of KOMTRAX Setting condition of terminal 53p Condition of positioning and communication 54p MODEM S/N (Model TH300) 55p MODEM IP address (Model TH200) 56p Display of KOMTRAX message 57p D Function of checking display of LCD (Liquid Crystal Display) 17p D Function of checking service meter 17p D Function of changing attachment/maintenance password 18p