UEN00231-00 40 Troubleshooting Phenomena looking like troubles and troubleshooting Nos. 6 PC210, 230, 240-8 No.
Phenomena looking like troubles Troubleshooting Display of code E-mode H-mode S-mode Phenomena related to user code/failure code 1 User code and failure code are displayed on ordinary screen of machine monitor Accord- ing to dis- played code 2 When abnormality record is checked, failure code is displayed in mechanical system abnormality record 3 When abnormality record is checked, failure code is displayed in electrical system abnormality record 4 When abnormality record is checked, failure code is displayed in air conditioner or heater abnormality record E-23 Phenomena related to engine 5 Starting performance is poor S-1 6 Engine does not start E-3 S-2 7 Engine does not pick up smoothly S-3 8 Engine stops during operations S-4 9 Engine does not rotate smoothly S-5 10 Engine lacks output (or lacks power) S-6 11 Exhaust smoke is black (incomplete combustion) S-7 12 Oil consumption is excessive (or exhaust smoke is blue) S-8 13 Oil becomes contaminated quickly S-9 14 Fuel consumption is excessive S-10 15 Oil is in coolant (or coolant spurts back or coolant level goes down) S-11 16 Oil pressure drops S-12 17 Oil level rises (Entry of coolant/fuel) S-13 18 Coolant temperature becomes too high (overheating) S-14 19 Abnormal noise is made S-15 20 Vibration is excessive S-16 21 Preheater does not operate E-4 22 Automatic warm-up system does not operate (in cold season) E-5 23 Auto-decelerator does not operate normally E-15 H-5 Phenomena related to work equipment/swing/travel 24 Work equipment, swing, and travel mechanism do not move or cannot be locked E-6 H-3 25 Speed or power of whole work equipment, swing, and travel is low H-1 26 Engine speed lowers extremely or engine stalls H-2 S-6 27 Working mode does not change E-16 28 Abnormal sound comes out from around hydraulic pump H-4 29 Fine control performance or response is low H-6 Phenomena related to work equipment 30 Speed or power of boom is low H-7 31 Speed or power of arm is low H-8 32 Speed or power of bucket is low H-9 33 Work equipment does not move singly H-10 34 Hydraulic drift of work equipment is large H-11