UEN00240-00 40 Troubleshooting Failure code [CA144] Coolant Temp Sens High Error 1 30 PC210, 230, 240-8 User code Failure code Trouble Coolant temperature sensor high error (Engine controller system) E15 CA144 Contents of trouble • Signal circuit of coolant temperature sensor detected high voltage. Action of controller • Fixes coolant temperature value and continues operation. Problem that appears on machine • Exhaust gas becomes white. • Overheat prevention function does not work. Related infor- mation • Signal voltage of coolant temperature sensor can be checked with monitoring function. (Code: 04105 Coolant temperature sensor voltage) • Method of reproducing failure code:
Turn starting switch ON. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective coolant tempera- ture sensor a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. COOLANT TEMP (male) Resistance Between (A) – (B) 0.18 – 160 kz 2 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CE01 (female) (15) – COOLANT TEMP (female) (B) Resis- tance Max.
10 z Wiring harness between CE01 (female) (38) – JC03 – COOLANT TEMP (female) (A) Resis- tance Max. 10 z 3 Short circuit in wiring har- ness (with another wiring harness) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CE01 (female) (15) – each of CE01 (female) pins (With all wiring harness connectors disconnected) Resis- tance Min. 100 kz 4 Defective wiring harness connector Connecting parts between coolant temperature sensor – engine wir- ing harness – engine controller may be defective. Check them directly.
• Looseness of connector, breakage of lock, or breakage of seal • Corrosion, bend, breakage, push-in, or expansion of pin • Moisture or dirt in connector or defective insulation 5 Defective engine controller a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CE01 (female) Resistance Between (15) – (38) 0.18 – 160 kz