Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Failure code [DY20KA] Wiper Working Abnormality

UEN00243-00 40 Troubleshooting Failure code [DY20KA] Wiper Working Abnormality 1 28 PC210, 230, 240-8 User code Failure code Trouble Wiper working abnormality (Pump controller system) — DY20KA Contents of trouble • When windshield wiper works, W signal of working ends is not input. Action of controller • Turns working output to wiper motor OFF. • If cause of failure disappears, system resets itself. Problem that appears on machine • Wiper motor does not work. Related infor- mation • Condition of W contact signal of wiper working area can be checked with monitoring function. (Code: 02204 switch 5) • Method of reproducing failure code: Turn starting switch ON + Set wiper switch to INT or ON.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective wiper motor (Inter- nal disconnection) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. M05 (female) Wiper blade Resistance Between (6) – (5) Operating range top Max. 1 z Other than operating range top Min. 1 Mz 2 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between C01 (female) (56) – M05 (male) (6) Resis- tance Max.

1 z Wiring harness between M05 (female) (5) – J04 – chassis ground (T05, T06) Resis- tance Max. 1 z 3 Defective pump controller a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. C01 (female) Wiper blade Resistance Between (56) – chas- sis ground Operating range top Max. 1 z Other than operating range top Min. 1 Mz