Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Failure code [DY20MA] Wiper Parking Abnormality

UEN00243-00 40 Troubleshooting Failure code [DY20MA] Wiper Parking Abnormality 1 30 PC210, 230, 240-8 User code Failure code Trouble Wiper parking abnormality (Pump controller system) — DY20MA Contents of trouble • When windshield wiper parks, P signal of storage area is not input. Action of controller • Turns parking output to wiper motor OFF. • If cause of failure disappears, system resets itself. Problem that appears on machine • Wiper motor does not park. Related infor- mation • Condition of P contact signal of wiper parking area can be checked with monitoring function. (Code: 02204 switch 5) • Method of reproducing failure code:

Turn starting switch ON + Set wiper switch to INT/ON to OFF. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective wiper motor (Inter- nal disconnection) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. M05 (female) Wiper blade Resistance Between (4) – (5) Storage area Max. 1 z Working area Min. 1 Mz 3 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.

Wiring harness between C01 (female) (75) – M05 (male) (4) Resis- tance Max. 1 z Wiring harness between M05 (female) (5) – J04 – chassis ground (T05, T06) Resis- tance Max. 1 z 4 Defective pump controller a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. C01 (female) Wiper blade Resistance Between (75) – chas- sis ground Storage area Max. 1 z Working area Min. 1 Mz