Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — E-2 When starting switch turned ON (before starting engine), basic check item lights up

UEN00244-00 40 Troubleshooting E-2 When starting switch turned ON (before starting engine), basic check item lights up 1 8 PC210, 230, 240-8 Trouble (1) Radiator coolant level monitor lights up red. Related infor- mation • Although radiator coolant level monitor is basic check item, it is also checked while engine is running. (If monitor lights up red while engine is running, carry out this troubleshooting, too.) • Condition of radiator coolant level switch signal can be checked with monitoring function. (Code:

04500 Monitor input 1) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Lowering of radiator coolant level (When system is nor- mal) Coolant level in radiator sub tank may be low. Check it and add coolant if necessary. 2 Defective radiator coolant level switch (Internal discon- nection) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. P24 (male) Sub tank coolant level Resistance Between (1) – (2) Between FULL – LOW Max. 1 z Below LOW Min.

1 Mz 3 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CM02 (female) (3) – P24 (female) (1) Resis- tance Max. 1 z Wiring harness between P24 (female) (2) – chassis ground (T10) Resis- tance Max. 1 z 4 Defective machine monitor a Prepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. CM02 Sub tank coolant level Voltage Between (3) – chassis ground Between FULL – LOW Max. 1 V Below LOW 20 – 30 V