UEN00244-00 40 Troubleshooting E-6 All work equipment, swing, and travel mechanism do not move or cannot be locked 1 18 PC210, 230, 240-8 Trouble (1) All work equipment, swing, and travel mechanism do not move. Related infor- mation Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective fuse No. 3 If fuse is broken, circuit probably has ground fault. (See cause 6.) 2 Defective lock lever switch (Internal disconnection) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. S14 (female) Lock lever Resistance Between (1) – (2) Lock Min. 1 Mz Free Max.
1 z 3 Defective PPC lock solenoid (Internal disconnection or short circuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. V01 (male) Resistance Between (1) – (2) 20 – 60 z Between (1) – chassis ground Min. 1 Mz 4 Defective assembled-type diode D01 (Internal short cir- cuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. D01 (male) Resistance (Continuity) Between (4) – (8) Min.
1 Mz (No continuity) 5 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between F01-3 – S14 (male) (1) Resis- tance Max. 1 z Wiring harness between S14 (male) (2) – V01 (female) (1) Resis- tance Max. 1 z Wiring harness between V01 (female) (2) – chassis ground (T09) Resis- tance Max. 1 z 6 Ground fault in wiring har- ness (Short circuit with GND circuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.
Wiring harness between F01-3 – S14 (male) (1), – circuit branch end Resis- tance Min. 1 Mz Wiring harness between S14 (male) (2) – V01 (female) (1), – D01 (female) (4) Resis- tance Min. 1 Mz