40 Troubleshooting UEN00244-00 E-11 Fuel level gauge does not indicate normally 1 Circuit diagram related to fuel level sensor PC210, 230, 240-8 29 Trouble (1) While fuel is added, fuel level gauge does not rise from red range (E). (2) While fuel level is low, fuel level gauge does not lower from green range top (F) Related infor- mation • Signal voltage of fuel level sensor can be checked with monitoring function. (Code:
04200 Fuel level sensor voltage) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective fuel level sensor (Internal disconnection or short circuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. P21 (male) Fuel level Resistance Between (1) – chassis ground FULL 7 – 11 z EMPTY 85 – 95 z 2 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CM01 (female) (9) – P21 (female) (1) Resis- M tance ax.
1 z 3 Ground fault in wiring har- ness (Short circuit with GND circuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CM01 (female) (9) – P21 (female) (1) Resis- M tance in. 1 Mz 4 Hot short (Short circuit with 24V circuit) in wiring harness a Prepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. Wiring harness between CM01 (female) (9) – P21 (female) (1) Voltage M ax. 1 V 5 Defective machine monitor a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.
CM01 (female) Fuel level Resistance Between (9) – chassis ground FULL 7 – 11 z EMPTY 85 – 95 z