Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — E-19 Windshield wiper and window washer do not operate

UEN00244-00 40 Troubleshooting E-19 Windshield wiper and window washer do not operate 1 36 PC210, 230, 240-8 Trouble (1) When wiper switch is operated, wiper monitor does not light up or go off. Related infor- mation • Condition of wiper switch signal can be checked with monitoring function. (Code: 04504 Monitor 1st, 2nd line switches) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective machine monitor Machine monitor may be defective. (Since trouble is in system, troubleshooting cannot be carried out.) Trouble (2) When wiper switch is operated, wiper does not operate.

Related infor- mation • Condition of window rear limit switch signal can be checked with monitoring function. (Code: 02204 Switch 5) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective window rear limit switch (Internal short circuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. W03 (male) Front window Resistance Between (1) – (2) When installed to front Min. 1 Mz When retracted to rear Max. 1 z 2 Defective wiper motor (Inter- nal disconnection) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.

M05 (female) Continuity Between (1) – (3) There is continuity 3 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between C02 (female) (119) – M05 (male) (3) Resis- tance Max. 1 z Wiring harness between C02 (female) (114) – M05 (male) (1) Resis- tance Max. 1 z 4 Ground fault in wiring har- ness (Short circuit with GND circuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. C01 (female) (57) – W03 (female) (1) Resis- tance Min.

1 Mz 5 Defective pump controller (Rear limit switch system) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. C01 (female) Front window Resistance Between (57) – chassis ground When installed to front Min. 1 Mz When retracted to rear Max. 1 z Defective pump controller (Wiper motor system) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. C02 (female) Continuity Between (119) – (114) There is continuity