UEN00245-00 40 Troubleshooting H-12 Time lag of work equipment is large.......................................................................................... 17 H-13 When part of work equipment is relieved singly, other parts of work equipment move ............. 17 H-14 Power maximizing function does not work ................................................................................ 18 H-15 In compound operation of work equipment, speed of part loaded more is low ......................... 18 H-16 When machine swings and raises boom simultaneously, boom rising speed is low .................
19 H-17 When machine swings and travels simultaneously, travel speed lowers largely....................... 19 H-18 Machine deviates during travel.................................................................................................. 20 H-19 Travel speed is low.................................................................................................................... 21 H-20 Machine is not steered well or steering power is low ................................................................ 22 H-21 Travel speed does not change or travel speed is low/high........................................................
23 H-22 Travel system does not move (only one side) ........................................................................... 24 H-23 Upper structure does not swing................................................................................................. 25 H-24 Swing acceleration or swing speed is low ................................................................................. 27 H-25 Upper structure overruns remarkably when it stops swinging ................................................... 28 H-26 Large shock is made when upper structure stops swinging ......................................................
29 H-27 Large sound is made when upper structure stops swinging...................................................... 29 H-28 Hydraulic drift of swing is large.................................................................................................. 30 H-29 Attachment circuit is not changed.............................................................................................. 31 H-30 Oil flow in attachment circuit cannot be controlled .................................................................... 31 2 PC210, 230, 240-8