40 Troubleshooting UEN00245-00 H-19 Travel speed is low 1 PC210, 230, 240-8 21 Trouble • Travel speed is low. Related information • Carry out all troubleshooting in power mode (P) of working mode. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of travel PPC valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Travel lever PPC valve output pressure Neutral 0 MPa {0 kg/cm2} Forward Reverse 2.84 – 3.43 MPa {29 – 35 kg/cm2} 2 Malfunction of self pressure reducing valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting.
Control lever Control circuit basic pressure All levers in neutral 2.84 – 3.43 MPa {29 – 35 kg/cm2} 3 Malfunction of LS-EPC valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Measured oil pressure Travel lever LS-EPC valve output pressure Lo Neutral Approx. 2.9 MPa {Approx. 30 kg/cm2} Hi Operated 0 MPa {0 kg/cm2} 4 Malfunction of travel control valve (spool) Spool of travel control valve may have malfunction. Check it directly. 5 Malfunction of travel control valve (pressure compensa- tion valve) Pressure compensation valve of control valve may have malfunc- tion. Check it directly.
6 Malfunction of travel control valve (suction valve) Suction valve of control valve may have malfunction. Check it directly. 7 Malfunction of bucket control valve (LS shuttle valve) LS shuttle valve of bucket control valve may have malfunction. Check it directly. 8 Defective travel motor a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Travel lever Leakage from travel motor Travel relief 27.2 l/min 9 Defective final drive Final drive may have internal defect. Check it directly. a It may be checked by abnormal sound, abnormal heating, metal chips in drain oil, etc.