Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Idler

10 Structure, function and maintenance standard UEN00098-00 Unit: mm No.

Remedy 1 2 3 Build-up welding or replace 4 5 6 7 Replace bushing 8 9 PC210, 230, 240-8 5 Check item Criteria Outside diameter of protrusion Standard size Repair limit 538 — Outside diameter of tread 500 488 Thickness of tread 26 20 Difference of tread 19 25 Total width 159 — Width of tread 37.5 — Clearance between shaft and bushing Standard size Tolerance Standard clearance Clearance limit Shaft Hole 65 –0.250 –0.350 +0.164 –0.074 0.176 – 0.514 — Interference between idler and bushing Standard size Tolerance Standard interfer- ence Interfer- ence limit Shaft Hole 72 +0.108 +0.008 –0.032 –0.062 0.040 – 0.170 — Clearance between bushing and support (Sum of clearance at both sides) Standard clearance Clearance limit 0.5 – 1.0 —