Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Track roller

10 Structure, function and maintenance standard UEN00098-00 Track roller 1 PC210/240-8 Unit: mm No.

Remedy 1 2 Build-up welding or replace 3 4 5 6 7 Replace bushing 8 9 Replace PC210, 230, 240-8 7 Check item Criteria Outside diameter of flange Standard size Repair limit — 144 Buil 38.5 — — — 188 Outside diameter of tread 156 Thickness of tread 44.5 Total width 225 Width of tread 44.5 Width of flange 25.5 Clearance between shaft and bushing Standard size Tolerance Standard clearance Clearance limit — Rep Interfer- ence limit — Shaft Hole 60 –0.215 –0.315 +0.195 –0.000 0.215 – 0.510 Interference between roller and bushing Standard size Tolerance Standard interfer- ence Shaft Hole 67 +0.153 +0.053 +0.030 –0.000 0.023 – 0.153 Clearance between bushing and collar (Sum of clearance at both sides) Standard clearance Clearance limit — 0.5 – 1.0