UEN00098-00 10 Structure, function and maintenance standard Unit: mm * Dry type track link 10 PC210, 230, 240-8 No. Check item Criteria Remedy 20 Shoe bolt a. Regular link Tightening torque (Nm {kgm}) Retightening angle (deg.) Retighten Triple grouser shoe 490 ± 49 {50 ± 5} 120 ± 10 Road liner (Rub- ber pad type) 549 ± 59 {56 ± 6} — b. Master link Tightening torque (Nm {kgm}) Retightening angle (deg.) Lower limit torque (Nm {kgm}) — — — No. of shoes (each side) PC210: 45 PC210LC: 49 PC210NLC: 49 PC240LC: 49 PC240NLC:
51 — 21 Interference between bushing and link Standard size Tolerance Standard interfer- ence Adjust or replace Shaft Hole 59 +0.434 +0.394 +0.074 –0.000 0.320 – 0.434 22 Interference between regular pin and link 38 +0.222 +0.162 –0.138 –0.200 0.300 – 0.422 23 Clearance between regular pin and bushing Standard size Tolerance Standard clear- ance Shaft Hole 38 +0.222 +0.162 +0.902 +0.402 0.180 – 0.740 24 (*) Interference between master pin and link Standard size Tolerance Standard interfer- ence Shaft Hole 37.8 +0.280 +0.250 +0.062 –0.000 0.188 – 0.280 25 (*) Clearance between master pin and bushing Standard size Tolerance Standard clear- ance Shaft Hole 38 –0.150 –0.350 +0.902 +0.402 0.552 – 1.252