50 Disassembly and assembly UEN00660-00 21. Remove fuel filter and bracket assembly (23). a Put it on the engine. 26. Disconnect air cleaner tube (28). [*4] 27. Remove after cooler hose and tube assembly (29). a MIKALOR clamp [*5] a Mark the hose edge and tube to show the original hose installation positions. (See figure below.) 22. Remove hose and tube assembly (24). a Remove it without separating from the bracket. a MIKALOR clamp [*2] a Mark the hose edge and tube to show the original hose installation positions. (See figure below.) a If disconnecting air intake connector (C), replace the gasket. 23. Disconnect radiator hose (25).
[*3] a Mark the hose edge and tube to show the original hose installation positions. 24. Disconnect heater hose (26). 25. Remove fan guard (27). 28. Disconnect fuel filter hose (30) from fuel supply pump (FSP). a The fuel filter hose can be disconnected by pushing locks (L) at both sides. PC210, 230, 240-8 39